During testing BO XI 3.1, I found the error message " Maximum binary output size limit reached (ERR_WIS_30271)." Pls advise
↧
Maximum binary output size limit reached (ERR_WIS_30271)
↧
Cannot launch Java Report Panel
I would like to use the 'Advanced' Web Intelligence editor.
Unfortunately, when I attempt to edit a WI report, I get a message that reads 'This software has already been installed on your computer. Would you like to reinstall it?'
If I allow the installation, Java 6, Update 3 is downloaded and installed. I restart the browser. Attempting to edit the WI report generates the installation message.
If I don't allow the installation, I get an error that reads 'Cannot launch Java Report Panel, please make sure you have installed a Java virtual machine.'.
It never gets out of this installation loop.
At one point, the Advance editor worked, then something changed.
The Java Control Panel indicates that I have JRE versions 1.6.0_03 and 1.6.0._20 installed (in the Java Applet Runtime Settings). In addition, versions 1.4.2_04, 1.4.2_07, 1.4.2_12, and 1.6.0_03 are listed in the JNLP Runtime settings.
Any assistance is greatly appreciated.
Craig Buchanan
↧
↧
User input control for more than one tab in webI
Hi experts,
is it possible to use a user input control for more then one tab in a webI.
What I want to do is to create a webI with two tabs. When I create a user input control, then the filter only takes effect on one tab. for the second tab, I have to create another user input control.
Is there any solution for my problem?
↧
SAP Business Objects Web Intelligence 4.0 Download
Hello ALL,
Any idea how I can download the FREE version of SAP Business Objects Web Intelligence 4.0? I have installed the Business Object Edge which runs good but some new universes and some actions have been added to the 4.0 version which are not part of the Busines Object Edge. Any help?
Regards,
Recca
↧
WIS 10901 error while running WEBI report
Hello All
When we try to run WEBI report on BW query for Cost center accounting infocube its giving following error when we add measure in the info view.
"A database error occured. The database text is: Error in MDDataSetBW.GetCellData. See RFC trace file or SAP system log for more details. (WIS 10901)"
We did a trace and came to know that BO user id doesnt have authorization for Admin work bench. But when we authorize too its giving same error.
This error populates only when we drag measure into the info view of Webi and if we drag any characteristic it works fine.
Any help is highy appreciated.
Thanks
↧
↧
WEBI Nesting IF statements and use of ELSE
Hi,
Am quite new to the use of WEBI as I have traditionally been brought up in a full client environment so am used to writing IF statements with THEN and ELSE commands. However I noted that the same functionality doesnt appear to exist in WEBI, so was wondering how one writes an IF statement against a variable which has four outputs which all need to be independently named. Have tried using ; between if statements but it only appears to allow me to use a maximum of two....
Appreciate the assistance.
Thanks,
↧
How to configure Email sending functionlity on Info view
Dear All,
my Requirement is i want to send webi reports as Email to users how can i do this, what are the settings involved in infoview and CMC.
Regards
aflal
↧
Cannot launch Java Report Panel
I would like to use the 'Advanced' Web Intelligence editor.
Unfortunately, when I attempt to edit a WI report, I get a message that reads 'This software has already been installed on your computer. Would you like to reinstall it?'
If I allow the installation, Java 6, Update 3 is downloaded and installed. I restart the browser. Attempting to edit the WI report generates the installation message.
If I don't allow the installation, I get an error that reads 'Cannot launch Java Report Panel, please make sure you have installed a Java virtual machine.'.
It never gets out of this installation loop.
At one point, the Advance editor worked, then something changed.
The Java Control Panel indicates that I have JRE versions 1.6.0_03 and 1.6.0._20 installed (in the Java Applet Runtime Settings). In addition, versions 1.4.2_04, 1.4.2_07, 1.4.2_12, and 1.6.0_03 are listed in the JNLP Runtime settings.
Any assistance is greatly appreciated.
Craig Buchanan
↧
Could not open a connection to SQL Server [53]. . (IES 10901) (WIS 10901)
Hi All,
I have created a universe with OLE DB drivers. I could see the LOVs for objects created but when I create a WEBI report based off the same universe, I am getting below error. From Rich Client I am able to create a report however after I publish it with OPEN ON REFRESH it throws the error.
Database error: [Microsoft SQL Server Native Client 10.0] : Named Pipes Provider: Could not open a connection to SQL Server [53]. . (IES 10901) (WIS 10901)
As it is working from client machine but not from BI LaunchPad, I think it is referring to something that resides on client machine and not on server.
Environment:
BI 4.0 SP06
SQL server 2008.
Client tools on same patch level.
Regards,
Tejas
↧
↧
"Maximum List of Values Size" option of WebIntelligenceProcessingServer
In XI3.1,CMC -> Server -> WebIntelligenceProcessingServer's property setting
There is an option Maximum List of Values Size (entries)
What will be impact if I change that setting?
In "administrator's guide" I see the following but cannot understand.
-
Maximum List of Values Size (entries)
Specifies the maximum number of entries (or values) for each List of Values. The default value is 500000 entries per List of Values.
-
Thank you.
↧
WEBI Nesting IF statements and use of ELSE
Hi,
Am quite new to the use of WEBI as I have traditionally been brought up in a full client environment so am used to writing IF statements with THEN and ELSE commands. However I noted that the same functionality doesnt appear to exist in WEBI, so was wondering how one writes an IF statement against a variable which has four outputs which all need to be independently named. Have tried using ; between if statements but it only appears to allow me to use a maximum of two....
Appreciate the assistance.
Thanks,
↧
How to configure Email sending functionlity on Info view
Dear All,
my Requirement is i want to send webi reports as Email to users how can i do this, what are the settings involved in infoview and CMC.
Regards
aflal
↧
How do I concatenate a single field from multiple rows in BOXI 3.1 WebI?
Hi,
I'm using BOXI 3.1 WebI and have a need to show multiple values of a column in a comma delimited list. I tried using a horizontal table but if the list goes over the right margin it creates a new page instead of wrapping to the next line like we want. I can do what I want in Oracle sql using the WM_CONCAT aggregate function but haven't found a way to do it in WebI reports. Has anyone figured out a way to do this?
Thanks,
John Klein
↧
↧
Oracle Error : ORA-12170 : TNS Connect timeout occured (WIS 10901)
Hi,
I have a strange behaviour in my BO XI environnement (BO XI 3.1 sp3 / windows2008 R2 / websphere 7.0)
I try to refresh a webi document using the java applet and I have the following message : "ORA-12170 : TNS Connect timeout occured (WIS 10901)" (the error occurs about 20 seconds only)
What is strange is that the same webi document works perfectly if I use the RichClient...
The SQL request works fine (tested in Oracle)
Any help on this case would be greatly appreciated
Thanks,
David
↧
Error IES 10901 WIS 10901
Hi Experts,
I am making a dashboard using IDT. We have Oracle 11g at the back end and in the connections settings i am using Oracle Client to connect. I can successfully make the universe and can see the results overt here. But whenever i am trying to access that universe either from WEBI or DASHBOARD its giving the error "
Database error: (CS) "DBDriver failed to load : C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\dataAccess\connectionServer\drivers\lib64\dbd_oci.dll (The specified module could not be found.
)" . (IES 10901) (WIS 10901)"
Any idea what is going on? I am using the following environment:
BO 4.0 FP3 SP 04
Oracle 11g 64Bit
Oracle Client 64Bit
Attached is the snapshot of error.
Thanks
Ayaz
↧
SAP Business Objects Web Intelligence 4.0 Download
Hello ALL,
Any idea how I can download the FREE version of SAP Business Objects Web Intelligence 4.0? I have installed the Business Object Edge which runs good but some new universes and some actions have been added to the 4.0 version which are not part of the Busines Object Edge. Any help?
Regards,
Recca
↧
Oracle Error : ORA-12170 : TNS Connect timeout occured (WIS 10901)
Hi,
I have a strange behaviour in my BO XI environnement (BO XI 3.1 sp3 / windows2008 R2 / websphere 7.0)
I try to refresh a webi document using the java applet and I have the following message : "ORA-12170 : TNS Connect timeout occured (WIS 10901)" (the error occurs about 20 seconds only)
What is strange is that the same webi document works perfectly if I use the RichClient...
The SQL request works fine (tested in Oracle)
Any help on this case would be greatly appreciated
Thanks,
David
↧
↧
WIS 10901 error while running WEBI report
Hello All
When we try to run WEBI report on BW query for Cost center accounting infocube its giving following error when we add measure in the info view.
"A database error occured. The database text is: Error in MDDataSetBW.GetCellData. See RFC trace file or SAP system log for more details. (WIS 10901)"
We did a trace and came to know that BO user id doesnt have authorization for Admin work bench. But when we authorize too its giving same error.
This error populates only when we drag measure into the info view of Webi and if we drag any characteristic it works fine.
Any help is highy appreciated.
Thanks
↧
How to configure Email sending functionlity on Info view
Dear All,
my Requirement is i want to send webi reports as Email to users how can i do this, what are the settings involved in infoview and CMC.
Regards
aflal
↧
Merge dimensions, Combined query, Sub Query
Hi Everybody,
I have recently learned BO- Webi but couldnt understand Merge dimensions, Combined query and Sub Query properly. Can anybody explain above things in detail with examples.
I'll be grateful and points will be awarded generously.
Thanks in advance
Regards
krish
↧